The line laser for the ECOCUT sawhorse makes it even easier and safer to cut to length. The laser is continuously adjustable in length from 34 - 20 cm.
Drill a 6-6.2 mm diameter hole in the front strut of the sawhorse. The mounting rod is attached there with the supplied nuts.
Turn off the laser when not in use to prolong battery life.
Set the laser about 0.5 cm shorter than you need the pieces of wood, so you see exactly the line on the wood. Measure the exact length to the sword with a meter stick.
Mark the length on the left side of the sawhorse with a sharpie. This allows them to accurately convey the last cut.
